web statisticsRealtime website tracking software

Products See All Products

Excavator Mill

Asphalt Milling Attachment for Excavators

The Excavator Mill is an asphalt milling attachment for excavators. When connected to the backhoe remote hydraulic system, the Excavator Mill becomes a tool for asphalt repair, concrete cuts and grinding of shelf rock or outcroppings in construction work. The Depth Gauge allows the operator to pre-select the cutting depth from flush to max. depth in 1/2″ increments. The Excavator Mill is designed for hydraulic excavators up to 35 ton rating.

The Excavator Mill allows for a maximum cutting depth of 12 inches, and is unmatched in cutting depth capabilities for asphalt milling attachments. When compared to skid-steer milling attachments the Excavator Mill offers several advantages; sufficient down-force to penetrate while maintaining depth control, superior operator visibility of work area and cutter, cleaner operator environment, larger working envelope, and cleaner engine environment. The Excavator Mill is one of the few milling attachments that can cut above grade, useful when cutting on steep slopes.

Literature: Download


Equipment Type
Excavator milling/cutting attachment

Hydraulic Requirements 
3,500-5,000 PSI
30-50 GPM

Drive Type 
Hydraulic motor, planetary gear final drive.

System Control 
Controlled by host machine.

Approx. 3,100 lb.

Cutter Head 
3/4" shank, tungsten carbide-tipped cutter bits.
Cutting width, 25"-48" inches.
Drum diameter (tip diameter), 24 inches.
Cutter drum speed, 150 RPM at 50 GPM.

Rated at 5,000 PSI Max. and 60 GPM Maximum.
Planetary gear final drive, 50,000 lbs/in. continuous,
100,000 lbs/in. intermittent.
Cutting depth, 12 inches maximum.

Manufacturer's Warranty 
Request manufactuer's warranty
from Maddock Construction Equipment, LLC